When a dryer powers on but the drum does not rotate, the issue is usually mechanical and requires a proper inspection before any repair is recommended. In this Maytag dryer service, the customer reported that the dryer started normally, but the drum remained completely still. During the diagnostic inspection, our technician tested the drive system and found that the tensioner pulley had failed. The inspection also revealed a significant buildup of lint inside the dryer cabine

Inglis Dryer Won’t Start: Thermal Fuse Replacement and Internal Lint Cleaning When a dryer does not respond after the Start button is pressed, the symptom alone does not identify the failed component. Several electrical, safety, and operating components can affect whether a drying cycle begins. Appliance Fix Lab recently inspected an Inglis dryer that would not start. The technician tested the dryer components and confirmed that the thermal fuse was faulty. What the Customer

Modern laundry systems combine advanced wash programs, integrated controls, and space-efficient design. But when residue begins appearing on freshly washed clothes or drying performance changes, the source of the issue may be hidden well beyond the visible drum and lint filter. Appliance Fix Lab recently inspected an LG ThinQ laundry system after the customer noticed small particles of dirt on clothing after washing, especially on white items. The customer also reported an is

A Samsung refrigerator compartment stopped cooling properly. During the diagnostic inspection, our technician found heavy ice buildup in the evaporator area and restricted water drainage. The cooling components inspected during this service call appeared to be operating normally. In this confirmed repair case, hardened rubber drain outlets restricted the flow of defrost water. The water could not drain normally, accumulated, and froze again. The resulting ice buildup interfer

A Whirlpool electric oven can turn on and display the temperature while still not receiving enough power to heat correctly. In this Winnipeg service case, the oven would not reach the set temperature. The display was working, and the upper heating element was heating, but the lower bake element remained cold. What did the technician find? The technician checked the heating components and then tested the electrical supply to the range. The outlet was providing only 120V instea

A customer called Appliance Fix Lab because the washer was leaking from the front-right corner and had stopped draining water. Although these appeared to be two separate symptoms, the technician found that they were directly connected. What happened The technician disassembled the washer and traced the leak to the hose connecting the detergent dispenser to the washer tub. Water escaping from the damaged hose had reached the drain pump and damaged it. Because the pump was no l